Transmitting Antennas
General. The FP BB-series panel antennas are designed for FM Band II (87.5 – 108 MHz). Each antenna is made with hot dipped galvanized steel and composed of two dipoles, a grid reflector and mounting brackets.
Excellent Performance for stereo and SCA operation
Antenna systems. Stacking more panels it's possible to obtain customized patterns, increase the gain and the power handling capacity according to user requirements. Customized pattern, electrical beam tilt and null fill are available upon request.
Broadband. Suitable for channel or broadband operations with more channels combiners.
State of the art mechanical design, employing the finest materials (Hot Dipped galvanized steel, silver plated copper, non-corrosive brass, virgin PTFE and fiberglass) resulting in long life service.
Lightning resistance is guaranteed by the DC ground potential of the entire antenna.
Transmitting Antennas
R.F. Data:
Frequency Range 87.5 - 108.0 MHz
Bandwidth Broadband
Polarization:
FP BBO Horizontal
FP BBV Vertical
Connectors:
FP BB 7/16 DIN 7/16"
FP BB 7/8 EIA 7/8"
Max. power handling capability:
FP BB 7/16 1.4 kW
FP BB 7/8 3.5 kW
Gain (at mid band, ref. to l/2 dipole) 7.5
dBd
VSWR (in the whole band):
FP BBO < -19 dB
FP BBV < -18 dB
Impedance 50 W
Frontal to back ratio > 21 dB
Wind load (ref. 150 Km/h):
Frontal 164 Kg
Lateral 59 Kg
Grounding Via clamps
Horizontal Beamwidth (at -3 dB, at mid band) 48°
Vertical Beamwidth (at -3 dB, at mid band) 52°
Mechanicals:
Materials:
Reflectors Hot-dip galvanized steel
Radiator elements Hot-dip galvanized steel
Pole diameter 55 to 115 mm. (others on request)
Dimensions (HxWxD) 2450x1750x810 mm
Weight 48 Kg
ITEL S.r.l. TELECOMUNICATIONS AND BROADCASTING SERVICES Via Friuli, 6 - 33074 Fontanafredda (PN) - ITALY Tel. +39 0434 997667 - Fax. +39 0434 997687